Train Control Systems (TCS) 1465 – KAT24 4 Function Decoder W/ Built In Keep Alive

This decoder is a T4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but features the same operational characteristics. This decoder is compatible with any locomotive which uses the JST-9 interface. Keep-Alive®: Included on-board for smooth, stutter-free operation. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor control for “buzz” free motor performance. DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC. Variable Momentum: Allows you to make custom acceleration and deceleration curves. Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs. Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder. Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects! Dimmable Brightness: Configure multiple different brightness levels for your LED’s or incandescent bulbs. Decoder Lock: Feature which prevents accidental/unwanted programming while activated. Airwire™ Compatible: Fully compatible with Airwire™ operation. User-Loadable Speed Tables: Configure custom speed curves and set speed limits. TCS KAT24 4 Function Decoder w/ Built in Keep Alive